- No-compromise quality steel
AISI 304 18/10 is a high quality steel. Its stability guarantees good-looking and durable products, ensuring maximum hygiene and corrosion resistance over time.
- Hot gas deforst
To defrost in a few minutes at the end of each cycle. Maximum efficiency conditions are restored in the next cycle to avoid waste of energy.
- High-efficiency fans
They allow for a 30% energy saving compared to the traditional version.
- Insulation thickness
The 60 mm thick inslation ensures lower heat loss, reduced work of the compressor, therefore lower energy comsumption.
- Core probe
It makes the compressor run only for the time strictly necessary.
- Aspera compressors
Aspera compressors reduce energy consumption by 15% and acoustic impact by 5 dBA.
Coldline made major investment in design research, becoming a leader in technology and innovation. Each cabinet marked with the FSS(Fast Service System) symbol is equipped with a refrigeration system independent of the structure, which provides improved flexibility and service.
The FSS(Fast Service System) allow you to change the intended use of an appliance, a freezer into a chiller - and the other way around, even after years of installation. You can extend the life of a refrigeration cabinet by replacing its old refrigeration system with a new one. Maintenance and service are simple, quick and do not require specialised personnel.
Self-closing, with 105° dwell
Strucure in stainless steel wire AISI 304 Cr-Ni 18/10
Stainless steel AISI 304 thick 2 mm
60 mm thickness - CFC/HCFC free
Stainless steel AISI 304 18/10
Magnetic, easy to replce
Removable in stainless steel AISI 304 Cr-Ni 18/10
Rounded coners ensuring maximum hygiene
Stainless steel AISI 304 adjustable 100 mm -150 mm
Reinforced overlap oven
|Dimension(L x W x H):
780 mm x 800 mm x 1545 mm
N. 10 Pair of slides GN1/1 Pitch 75 mm
5211W (*Evap. -10°C cond. 45°C)
|Packing Dimension(L x W x H):
800 mm x 830 mm x 1600 mm
|Blast chilling yield +90°+3°C:
400 V 3N - 50Hz
|Blast chilling/deep-freezing mode:
With core probe and at preset time
|Deep-freezing yield +90°-18°C:
3345 W - 6.2 A
|HACCP recorder for Blast Chillers/Freezers
|Kit Sterilizing UV lamp for Blast Chillers/Freezers
|Kit heated needle probe for Blast Chillers/Freezers
|Kit of 4 swivel and brake castors in stainless steel AISI 304
|Plastic coated shelf EN 600 mm x 400 mm
|Pair of slides type L - 402 mm GN/EN